How to Install Peel and Stick Floor Tile
|
|
Time to read 4 min
Wooden floors are timeless with a capital t. Perhaps you’re eyeing an upgrade for your home… except when you search up the cost. Averaging at $4500 for 500 square feet, the expense of a wood floor tile upgrade can easily put you off. Especially considering it can also take quite a few days.
💡 That’s where peel and stick floor tiles come to the rescue.
They’re not only budget-friendly—with our discount currently running, you can cover 1500 square feet for under $2000—they also make for a quick and easy-to-do-yourself project. That is to say, you can easily have it done over the weekend.
If you’re in—here’s how to install peel and stick floor tile in your home 🤍
Tools Needed
Most of these will be readily available at home. Or you can find them at your nearest utility store.
- Peel-and-stick floor tiles ( surf our entire collection here )
- Measuring tape
- Utility knife
- Scissors
- Cleaning supplies (mop, bucket, degreaser)
Estimate How Much Material You Need
Before you get to installing, you’ll need to decide how much material you need. First, measure the length and width of the room. Multiply these numbers to find the area of the room. For example, if the length of the room is 14 meters and the width is 10 meters, you will calculate like:
Area = 10 m * 14 m = 140 m² ≈1507 sq.ft
If your room isn’t a perfect box, you can split the space into a bunch of rectangles. Then find the area of each rectangle and add those together to find the total. If you’re doing it in the kitchen, don’t forget to add the area under the stove, dishwasher, and refrigerator. These will make their own little rectangles.
Then, it’s time to find how many packs of tile you need. For example, if you choose Diamond Black Peel and Stick Floor Tile, one pack of 32 sheets will cover 32 sq.ft. Divide the area you have found with this number.
Number of packs needed = 1507/32 = 47.09 ≈ 48 packs
Need to allow for 5% wastage.
Once you've ordered your 48 packs, you're ready to cover 140 square meters of flooring.
How to Install Peel and Stick Floor Tile
Our peel and stick floor tile application is super simple. Great for seasoned DIYers or first-timers alike.
Clean the Floor
You probably aren’t a fan of that existing flooring—but you gotta show it some love, one last time 😉 We mean, thoroughly cleaning the floor. If you have a carpet, get rid of that first. Then, remove dirt, grease, and debris. You can also use a degreaser ( here are some of the best ones ). And, we can’t emphasize this enough: make sure the floor is dry. Moisture will compromise the adhesive, so for a sturdy application, it’s important to make sure you dry the floor well.
If you're working in the kitchen, scrub away grease splatters, especially near the stove area. And in the bathroom, you want to pay extra attention to drying the floor around the toilet and sink (this is where water tends to collect).
Peel Off the Backing
Get your first tile and peel off the backing paper. You want to be careful not to touch the adhesive side too much (this makes sure it stays sticky). Also have your layout in mind so you know exactly where to place the tile.
Lay the Tile
Now, it’s time to lay the tiles on the floor. Begin in the center of the room. Place the tile on the floor and firmly press it down. Then smooth it out beginning from the center—and work towards the edges. (This will eliminate air bubbles). Continue placing the tiles in straight lines. You will be working outwards and keeping them snug against one another.
Trim with a Utility Knife for the Perfect Fit
When you reach the wall, chances are, you will need to cut the tile so it fits well. You can use a ruler and utility knife to mark the line along which you will cut the tile. Then bend it along your marked line and let this guide you as you cut it with a pair of sharp scissors. Once you’ve trimmed the tile, peel off the backing and firmly stick it.
For example, around the base of a fireplace, you may need to make precise cuts. These help make sure the tiles fit perfectly against the edges.
What NOT to Do
- Do not apply on uneven flooring (this may cause the tiles to crack over time).
- Do not use additional adhesives; the adhesive applied to the tile will suffice.
- Do not apply over excessive moisture (the tile won’t stick well if you do so).
- Do not apply on heavily textured flooring. If you do, the body may not bond adequately.
Final Words
And, just like that, you’ll have a brand new floor 😊 When done, clean the surface with a wet cloth. If there’s an excess adhesive on the surface, it will be removed. Also, try to keep off the floor for 72 hours. This lets the adhesive set. And, after that, you’re good to go! Read: Enjoy your expensive-looking, not-so-expensive flooring upgrade 😉
FAQs
Can peel and stick floor tile get wet?
Yipscazo's peel and stick floor tile has a waterproof surface and glue on the bottom, so as long as it's not submerged in water all the time, it's still waterproof. A variety of styles are available to match different styles of spaces, and you can choose your favorite self adhesive floor tiles.
Is peel and stick tile good for the floor?
There are ready-to-peel floor tiles that are used exclusively, these tiles use a strong adhesive on the back of the tiles, these tiles are installed so securely on the floor that the only way you can peel it off the floor is if you cock a corner with a sharp object. It is very affordable for remodeling a space without the cost of professional labor and expensive traditional floor tiles.
