White Rainbow Glass Mosaic Tile
peel and stick glass tile for fireplace
Properties of glass tiles
White Rainbow Glass Mosaic Tile
peel and stick glass tile for fireplace
Properties of glass tiles

6.6" x 6.6" White Rainbow Peel and Stick Backsplash Glass Mosaic Tile

Price
Save 17%
/
  • Free returns
  • 30 Day Return Policy
  • Secure payments

Save 15% on order over $150

About this item

  • Size: High-grade 6.6"x6.6"x0.16" peel-and-stick glass tiles make up 40 sheets, covering 12.1 square feet! Installing these tiles is easier than traditional 12"x12" self-adhesive ones.
  • EASY DIY: Peel and stick installation, strong 3M backing foam tape. No need for special tools, no extra adhesive, no grouting without mess, save your time and money on contractors.
  • USES: Most people used kitchen backsplash, steamy bathroom walls, laundry rooms, RV, fireplace, safe for use in wet areas. It will improve the waterproof performance if use glass glue or caulk to fill the seam.
  • MATERIAL: Sturdy quartz glass, these mosaics in gentle colors will not lose their colors, you can create beautiful patterns not limited by imagination.
  • It is recommended you purchase a minimum of 10% extra tiles to account for design cuts and patterns. Please capture all tiles for a project within one order, so multiple orders with long intervals may receive slightly different colors.

white rainbow glass tile for wall decor

How To Install Glass Tile

Step 1: Clean the walls

Make sure the wall is clean, dry and dust-free before starting your project.

Step 2: Measure the area

Using a chalk line or level, create at least one vertical and one horizontal reference line to guide tile placement.

Step 3: Cut the tile

If there is a need to cut tiles to fit corners or outlet

  1. Use a utility knife and ruler to cut along with the gap between tiles.
  2. Use a glass cutter to make a crack in the tile surface and then break it off with glass pliers.
  3. A wet saw can easily cut through the glass tiles without dust after filling them with water. It is ideal for wearing rubber gloves and eye goggles.

Step 4: Peel and stick

Remove the film backing from both sides of the tile. Lightly place the tile onto the wall using your reference lines and then line up. Do not apply pressure to the tile until you are sure of your placement.

Tips: You can use white caulk, glass glue, Flex Seal, or silicone sealant to fill the gaps between tiles, and wipe the surface residue with a rag.

Before and after installation

All orders will be processed within 24 working hours. Unless there is a fraudulent warning or shipping address error.
We Do NOT ship during weekends or holidays.

We have 30-day returns policy to enable you to return products to us in appropriate circumstances. Once your return is received and inspected, a credit will automatically be applied to your credit card or original payment method within 3-5 days. Click here to see how to return.

Resistant to heat and humidity

It has thickness of 4.3mm, resistant to heat and humidity, widely use in home décor such as kitchen island walls, bathroom backsplash, bedroom walls, laundry room, Washbasin, fireplace etc.

Easy maintain

The surface is a real texture and metal foil, not 3d-gel, no discoloration, and easy wipe to remove the stain, don't worry about splashes. It is fully competent with hold up in a real-life kitchen and bathroom.

Cutting tips

The gap between each tile is 3M adhesive foam, you can easily separate them by an utility knife.If you need to cut tiles to get a straight edge, please kindly use good industrial scissors or x-acto knife to cut the tile. The back of the tile is composite PVC layer which will be easier to cut than the metal surface.

Q1: Can I install the tiles behind the stove and fireplace?
A1: Yes. Our adhesive wall tiles are heat-resistant. In long-lasting usage, we recommended keeping 12'' away from the center of the stove and fireplace.

Q2: Are peel and stick tiles resistant to humidity and water? And can I put these in a shower?
A2: Yes, the tiles are water-resistant/waterproof, they are resistant to bathrooms and water splash humidity. For shower room usage, we highly recommend our thicker backsplash stick tile. To provide the best environment for the tiles, ensure the bathroom has proper air circulation.

Q3: Where can I apply the tiles?
A3: Recommended Surface
smooth ceramic tiles backsplash, smooth glass tiles backsplash, acrylic wall panel, pained gypsum, wall linoleum, stainless metal, mirror, laminate, wallpaper (if some corners are peeling, just peel them off and install tiles over them).They are not suitable for outdoor settings or on the floor.
We strongly recommend to clean the surface properly with a degreaser such as TSP before installing. After the surface has dried, you can install the tiles.

Q4: How can I remove the tiles?
A4: Our tiles are strong adhesive. If you want to remove the tile, use a heat gun or a blow dryer to warm up the glue and pull softly starting with the corners, that won't damage the wall.

If you have any questions, please live chat with us, our customer service team will do our best to help you!
Or, E-mail us at: mosaic5@tenglas.com（Reply within 24 hours）

You may also like
Recently viewed
Back to Glass Tile Backspash